| Chipset |
Intel H420E |
| Processor |
10th generation Intel Core i3, i5, i7, Pentium, or Celeron on socket, up to 35 W, to be ordered separately |
| Memory |
2 SO-DIMM DDR4 slots at 2,933 MHz, up to 64 GB total, memory to be ordered separately |
| Referenced memory options |
8, 16, or 32 GB DDR4-3200 SO-DIMM modules |
| Graphics |
Intel HD Graphics |
| BIOS |
AMI UEFI, 128 Mbit |
| Hardware Security |
Integrated TPM 2.0 |
| Watchdog |
programmable delay from 1 to 255 seconds in 1-second steps |
| Ethernet |
3 RJ45 10/100/1,000 Mbps ports, Gigabit Ethernet 1000BASE-T |
| Ethernet Controllers |
2 Intel i210-AT on LAN A and LAN B, 1 Intel i219-V on LAN C |
| Supported Ethernet Standards |
IEEE 802.3az for energy efficiency and IEEE 802.1AS for time synchronization |
| Remote management |
out-of-band power management by Advantech iBMC on LAN B |
| Serial interfaces |
2 DB9 ports configurable in RS-232/422/485 and 1 DB9 RS-232 port, from 50 bit/s to 115.2 kbit/s |
| USB interfaces |
4 USB 3.2 Gen 1 Type-A ports and 2 USB 2.0 Type-A ports |
| DisplayPort |
1 DisplayPort 1.4 output compatible with DP++, up to 4,096 × 2,304 pixels at 60 Hz |
| HDMI |
1 HDMI 1.4 output, up to 4,096 × 2,160 pixels at 30 Hz |
| Audio |
1 microphone input and 1 line out, configurable to line input on request |
| Internal storage |
2 2.5-inch bays for SSD or hard drives |
| PCI Express extension |
1 PCIe x16 slot, up to 75 W for installed card |
| M.2 extension |
1 key B connector with SATA and USB 3.0 signals, for SATA SSD in 2242 or 2280 format, or LTE/5G modem in 3042 or 3052 format |
| Mini PCI Express extension |
1 full-size slot with PCIe and USB 2.0 signals |
| iDoor extension |
optional compatible module, with PCM-28P1BK-AE I/O board to be ordered separately and occupying the unique PCIe expansion opening |
| Optional cellular communication |
AIW-355DQ modules compatible with 5G sub-6 GHz, LTE, and WCDMA, with GNSS, in Europe, US, and China versions |
| Radio accessories |
reserved antenna slot on chassis, M.2 3052 heatsink, 150 mm antenna cable, and 167 mm multiband dipole antenna available as options |
| GPIO |
8-bit internal connector, with optional 15 cm DB9 cable to replace the dedicated RS-232 port |
| Controls and indicators |
power and reset buttons, power indicator, disk and network activity/status, 1 programmable indicator |
| Power |
10 to 36 V DC input on 4-pin terminal block, with ground terminal on chassis |
| Consumption |
59 W typical, 100 W maximum without expansion card, up to 174.1 W with card on the single-slot version |
| Power beyond 160 W total consumption |
24 V DC ± 20% |
| Optional power supply |
100 to 240 V AC input on C14 plug, 24 V DC output, 230 W, 4-pin terminal block |
| External power control |
2-pin terminal block for remote on/off, configurable by jumper for reset |
| Supported operating systems |
Windows 10 LTSC 2019, Windows 11, and AdvLinux based on Ubuntu 18.04 |
| Proposed system images |
AdvLinuxTU Embedded Linux x86-64 v3.1.1 and Windows 10 or Windows 11 LTSC x64 in High and Value editions |
| Dimensions (W × D × H) |
120 × 200 × 140 mm for single-slot chassis |
| Net weight |
3.5 kg |
| Mounting |
wall or stand, kit provided |
| Operating temperature |
−20 to +50 °C with 0.7 m/s airflow |
| Storage temperature |
−40 to +85 °C |
| Relative humidity |
up to 95% at 40 °C, non-condensing |
| Operating shock resistance |
50 g, 11 ms half-sine pulse, per IEC 60068-2-27 |
| Operating vibration resistance with SSD |
4 g RMS, 5 to 500 Hz random vibrations, 1 hour per axis, per IEC 60068-2-64 |
| Protection rating |
IP20 |
| Listed certifications |
CB/UL, CE/FCC Class A, CCC and BSMI, with additional certifications possible by module and by country |
| Size |
275x325x300mm
|
| Weight |
4250g |
| Operating System |
Linux, Windows 10 Pro, Windows 11 |
| CPU |
Intel i3, Intel i5, Intel i7 |
| Mount options |
Stand, Table, Wall mount |
| Design |
Fanless |
| SKU |
UNO-348-ANN1B |
| Brand |
ADVANTECH
|