| Product type |
MIL-SPEC rugged keyboard with integrated trackball |
| Mounting type |
Panel mount |
| Design standards |
MIL-STD-810G and MIL-STD-461G |
| Protection rating |
IP65 |
| Key type |
Waterproof, backlit, full-travel keys |
| Contact technology |
Rubber dome with carbon pill |
| Key travel |
3.0 mm nominal |
| Key actuation force |
0.49 to 0.97 N |
| Key lifetime |
10,000,000 actuations |
| Keycap material |
Black sprayed and laser-etched POM |
| Legend colour |
White |
| Backlighting power supply |
USB port powered |
| Backlighting adjustment |
Fn key with up and down arrow keys |
| External backlighting control |
Compatible with a customer-supplied PWM signal |
| Keyboard communication protocol |
USB 2.0 Full Speed |
| Trackball communication protocol |
USB |
| Supply voltage |
4.4 to 5.25 V DC |
| Non-backlit supply current |
100 mA |
| Typical supply current |
250 mA |
| Maximum backlit supply current |
400 mA |
| Main output connector |
Amphenol TVP00ZN-09-35PN 6-way circular connector |
| Mating cable connector |
Amphenol TV06ZN-09-35SN or equivalent |
| Connection system |
Rugged MIL-DTL-38999 Series III circular connector |
| Maximum USB cable length |
5 m |
| Optional cable |
A029-80-03 USB output cable with Amphenol connector, 3 m long |
| Pin 1 |
VCC |
| Pin 2 |
USB D- |
| Pin 3 |
USB D+ |
| Pin 4 |
0 V |
| Pin 5 |
Do not connect |
| Pin 6 |
Earth |
| PCB protection |
Acrylic conformal coating |
| Keyboard weight |
1,100 g ±10% |
| Enclosure material |
Aluminium 6082-T6 |
| Enclosure treatment |
Surtec 650 in accordance with MIL-DTL-5541 Type II Class 3 |
| Primer layer |
Black two-component epoxy primer |
| Primer layer thickness |
30 µm ±10 µm |
| Adhesion testing |
DIN EN ISO 2409 |
| Finishing layer |
RAL 9005 two-component polyurethane with 30% gloss |
| Finishing layer thickness |
30 µm ±10 µm |
| Gloss testing |
DIN 67530 and ISO 2813 at a 60° measurement angle |
| Fastener material |
A4 / 316 stainless steel |
| Corrosion resistance |
High |
| Approximate front dimensions |
507.70 × 171.20 mm |
| Approximate maximum depth |
56 mm |
| Panel cut-out shown on drawing |
Approximately 480.11 × 146.00 mm |
| Panel mounting holes |
14 through holes measuring 3.40 mm with 6.30 mm × 90° countersinking |
| Trackball diameter |
50.8 mm / 2 inches |
| Trackball module weight |
285 g ±10% |
| Trackball body material |
Aluminium 6060-T6 |
| Trackball finish |
Black Corro-Coat PE Series 5091 powder coating, RAL 9005 |
| Trackball pre-treatment |
Surtec 650 |
| Trackball fastener material |
A4 stainless steel |
| Trackball module revision |
002 |
| Ball material |
Epoxy resin |
| Ball colour |
Metallic grey |
| Tracking technology |
Optical tracking |
| Ball tracking force |
30 to 80 g with PTFE seal |
| Seal material and colour |
Grey PTFE |
| Maximum ball load |
100 N for 2 minutes at 20°C |
| Resolvable ball speed |
30 inches per second |
| Trackball switch manufacturer |
ITW |
| Trackball switch part number |
59-111 |
| Number of trackball switches |
2 |
| Switch actuation force |
3 N nominal |
| Switch travel |
2.3 mm nominal |
| Switch lifetime |
1,000,000 cycles |
| Trackball supply current |
Less than 50 mA, 35 mA typical |
| Resolution at 1 IPS |
1,256 counts per ball revolution ±10% |
| Resolution at 5 IPS |
2,512 counts per ball revolution ±10% |
| Internal trackball connector |
10-way JST vertical header B10B-PH-SM4-TB |
| Mating internal connector |
10-way JST PH, CR or KR type connector, such as PHR-10 |
| RE101 radiated emissions |
Magnetic field from 30 Hz to 100 kHz, Navy applications |
| RE102 radiated emissions |
Electric field from 10 kHz to 18 GHz, helicopter applications |
| CS109 conducted susceptibility |
Structure current from 60 Hz to 100 kHz |
| CS114 conducted susceptibility |
Bulk cable injection from 10 kHz to 200 MHz, curve 5 |
| CS115 conducted susceptibility |
Bulk cable impulse excitation at 33 MHz |
| CS116 conducted susceptibility |
Damped sinusoidal transients from 10 kHz to 100 MHz |
| CS118 electrostatic discharge |
±8 kV contact and ±15 kV air |
| RS103 radiated susceptibility |
Electric field from 2 MHz to 18 GHz at 60 V/m, helicopter applications |
| Low operating temperature |
-40°C for 2 hours according to MIL-STD-810G Method 502.5 Procedure II |
| Low storage temperature |
-55°C for 2 hours according to MIL-STD-810G Method 502.5 Procedure I |
| High operating temperature |
+70°C for 2 hours according to MIL-STD-810G and RTCA/DO-160G |
| High storage temperature |
+85°C for 3 hours according to MIL-STD-810G and RTCA/DO-160G |
| Humidity resistance |
24-hour aggravated cycle at 60°C, 10 cycles and 240 hours in total |
| Resonance search |
10 Hz to 2,000 Hz, 0.5 g acceleration over 3 axes |
| Random vibration |
20 Hz to 2,000 Hz over 3 axes for 1 hour per axis |
| Functional shock |
20 g, SRS from 45 Hz to 2,000 Hz, 3 shocks in each direction |
| Altitude |
25,000 ft at 376 mbar for 2 hours |
| Water ingress test |
IPX5 according to BS EN 60529:1992+A2:2013 |
| Temperature variation |
-45 to +70°C according to RTCA/DO-160G Section 5 Category B |
| Customization |
Alternative keyboard layouts, languages and specific adaptations available on request |
| Manufacturing quality system |
ISO 9001 |
| EMC standard |
| MIL-STD-461G |
2015 |
| Mount options |
Enclosed |
| IP |
IP65 |
| Layout |
QWERTY |
| SKU |
MKBL107N0046USB |
| Brand |
NSI
|
