Call us Contact us SAV

BlastShield secures access to your industrial network

Official BlastWave partner in France

Your controls engineer needs to reach a PLC. Your service team needs to troubleshoot a machine at a customer site. With BlastShield by BlastWave, you define which users and which devices are allowed to communicate on your industrial (OT) network.

Integral System supports you in France to choose the perimeter to protect and to plan its integration on a site or across a machine range.

What does each user see on the protected network?From an unauthorised device, the attacker discovers nothing inside the perimeter protected by BlastShield. What can an attacker see? Example on a packaging line BlastShield Attacker Unauthorised PC Attacker’s screen 0 devicesdetected The operator panel and the PLC stay invisiblefrom this device, on the protected perimeter. Who can reach which device? Example on a packaging line OEMservice Authenticated BlastShield Operator panel Access allowed PLC Access blocked The BlastShield gateway enforces the rights defined by the site. Who can reach which device? Example on a packaging line Siteengineer Authenticated BlastShield Operator panel Access allowed PLC Access allowed The BlastShield gateway enforces the rights defined by the site.

What does BlastShield do on an OT network?

BlastShield applies the Zero Trust principle to industrial connections: every access to the protected perimeter depends on the identity of the user or device and on the rules you have defined.

Limit what each user can reach

The technician signs in without a password, using multi-factor authentication. You open the HMI of the machine they maintain and keep the line PLC for the site team. The HMI’s own application rights stay unchanged.

Hide protected devices

Network cloaking limits the discovery of devices by unauthorised users. You still need to identify the protected interfaces and any other access path.

Control device-to-device traffic

Microsegmentation defines which machines can talk to each other. A SCADA system reaches the PLCs of its own line; traffic to another line is blocked on the controlled paths.

Which project do you want to secure?

Prepare an intervention at your customer’s site

On a refrigeration plant or a pumping station, your team, the operator and a subcontractor each work on different devices. Starting from a typical project, we work out with you:

  • who needs access to what;
  • who approves the rights;
  • how to check that they are removed once the job is done.

Starting point

  • one site
  • two user profiles
  • the devices they need to reach

Design service access in from the start

Your service team must be able to troubleshoot a machine after delivery, and the end customer wants to keep control over access to their plant. With your engineering department, we review:

  • the maintenance connection;
  • the devices that can be reached;
  • what it takes to replicate the architecture across a range.

Starting point

  • one machine model
  • the role of your service team
  • your customers’ usual constraints

How do you integrate BlastShield into an existing installation?

A legacy PLC, a SCADA PC and a multi-site network each call for different choices. Four steps help you scope the project.

Step 1

Locate the flows to control

It all starts with locating where the communications you want to control actually flow.

Step 2

Choose between gateway and agent

  • Gateway: protects several downstream IP devices, including PLCs or HMIs on which no software can be installed.
  • Agent: protects a host whose operating system is supported.
  • Orchestrator: centralises groups and access policies.

Step 3

Place the gateway

In passive mode, it controls remote access while local traffic keeps following its usual path. To also isolate devices from one another, you need a placement that controls those flows.

Step 4

Verify the perimeter during acceptance testing

Acceptance testing must check:

  • the allowed accesses;
  • the denied accesses;
  • that the SCADA system still works properly.

Who is BlastWave, the company behind BlastShield?

BlastWave, Inc. is a US cybersecurity vendor based in Palo Alto, California. It focuses on protecting industrial (OT) networks and critical infrastructure according to the Zero Trust principle.

Its BlastShield platform combines network cloaking, passwordless multi-factor authentication and granular segmentation of communications.

BlastWave documents how BlastShield supports the requirements of frameworks such as NIS2, IEC 62443 and the Cyber Resilience Act.

BlastWave at a glance

  • Headquarters: Palo Alto, California (USA)
  • Focus: Zero Trust cybersecurity for OT networks
  • Sectors: energy, water, manufacturing, oil and gas, data centers, buildings
  • In France: Integral System, official partner

Questions before starting a pilot

Start by checking what your architecture already covers. A VPN with suitable filtering can be enough for a well-defined remote access. BlastShield is worth evaluating if you also want to hide devices, manage different rights for several user groups or control communications between zones. See also our Tosi industrial VPN offer.

The gateway protects existing IP devices without installing an agent on each of them. Before the pilot, we review the topology, the protocols required, the supported hardware and the constraints of working on a live production site.

BlastWave documents cloud and on-premises deployment modes for the orchestrator. The study specifies the authentication mode and the connections required, in particular for installations subject to isolation constraints.

To prepare a quote, tell us the number of sites or machines, the users involved and the devices to protect. We separate the initial study, the gateways or agents required, the licences and the support. For an OEM, we can look at the first machine and the series roll-out separately.

Let’s look at what your technician needs to reach.

Describe in a few lines the type of site or machine, who works on it and which device must remain accessible. We will prepare the scenario of a BlastShield demonstration with you.

Integral System · 31 rue Ampère, 69680 Chassieu, France · Our industrial cybersecurity solutions

BlastWave technical documentation: BlastShield overview · gateway modes · orchestrator deployment.

Your quote

Your quote is empty.